liquid ring vacuum pump

Product Description:
SK series liquid ring vacuum pump and compressor is used to suction or compress air and other gas that is non-corrosive, unsolvable in water and with no solid powder, so that vacuum and pressure can be obtained in the sealed container. However, the gas allow mixed less amount of liquid.
SK liquid ring vacuum pump and compressor is widely used in several sectors such as mechanical, petrochemical, pharmaceutical, food, sugar making and electronic industry. When the air compression is operating under the constant temperature, it won't easily lead to any danger, when the pump is suctioning or compressing any explosive gas. Therefore, the pump is widely used.

Features:
1. Wide range of free-air capacities to match specific applications
2. Positive pressure oil system ensures proper lubrication and prevents oil starvation under high gas loads
3. Fast acting inlet valve protects internal components against oil and air contamination if the pump stops while under vacuum
4. Gas ballast valve limits internal condensation; Lets you use pump when condensable vapors are present

Note:

1. When the vacuum percentage range is 40% to 90%, or the pressure range is 0.05Mpa to 0.15Mpa, the gas suction and drainage will be subject to the amount of the supplied water amount and the crevice between the impeller and the side cover. If the flux is rather small, and the adjustment is not accurate enough, the gas suction and drainage tends to be smaller.
2. The value in the table is obtained under the following condition:
a.water temperature is 15℃
b.air temperature is 20℃
c. relative humidity of the gas is 70%.
d. air pressure is 0.1013Mpa
3. The performance difference in the table will not exceed 5%